Autel IM508S Adds 2019 Kia Sorrento Smart Key via OBD
Learn to add 2019 Kia Sorrento smart keys with Autel MaxiIM IM508S Programmer by OBD.
Hello guys! Here I'm gonna show how to add 2019 Kia Sorrento smart keys with Autel MaxiIM IM508S Programmer by OBD. Prepare 2 universal smart key, let's start.Plug IM508S connector into OBD.
IMMO >> AutoVIN >> Kia(Asia) >> OK >> USA >> Yes >> Smart key >> Immo status scan >> Read PIN >> Read Pin code(47 smart card)
Autel IM508S prompts: This function only supports models with 47 chip type smart card. Please ensure the key type is correct!
Press "Yes".
Turn the Hazard Warning Light on.
Turn the ignition off(note: the instrument screen is black).
Open and then close the driver door once!
Reading password...
The password that is read: 613304
Add key >> Start
This function supports add key and all key lost;
Performing this function will erase all existing keys, all the old keys must be relearned again to be able to use normally.
Press "Yes" to continue.
Turn the ignition off(note: the instrument screen is black).
Open and then close the driver door once!
Please enter the 6-digit security code: 613304
Note: click OK to complete the following steps:
Within 5s after OK is pressed, use the back or top of the Universal Smart Key to hold down the START button for 5s until the anti-theft lamps flash.
(If the operation failed with the prompts, please remove the key case and re-execute the above steps so that the key chip can be successfully programmed).
Programming succeeded.
Press Yes to program next one.
Number of current keys:2
Check the keys, both can work.
Done.
