Autel IM608 Pro2 Program 2020 Lexus NX300 All Smart Keys Lost
Learn to program 2020 Lexus NX300 all smart keys lost with Autel IM608 Pro2.
This is a demo on how to use Autel MaxiIM IM608 Pro 2 to program 2020 Lexus NX300 all smart keys lost by OBD. Read this article to learn how to do.
IMMO >> Accept >> Lexus >> Manual selection >> USA >> NX300 >> 2015-2021 >> Smart Key >> OK >> Control unit >> Keyless System(CAN) >> Backup IMMO Data(OBD) >> OK Turn the ignition off, and turn the hazard warning lamps on and off once. OK >> OK Autel IM608SII says "The current smart main ECU software version number is not supported." So we'll go to reset smart box instead.
Smart box reset >> Turn on hazard warning lamps Performing this function will clear all smart keys and make sure that the driver door is always open. Press "Yes" to continue. Resetting smart box, please wait... This will take about 16 minutes... Reset succeeded.
Add smart key >> Do you want to use the simulator key APB112? No. Turn on hazard warning lamps. Notice: Each step must be completed within the specified time. The positions for learning include: 7
Keep one key that needs programming inside the vehicle, take out the rest of keys outside vehicle, otherwise might cause key programming failure. Put a smart key to be learned close to the START button. Registering, please wait... Learning succeeded.
Test the new key, lock and unlock OK, it can also start the car. Done.