Autel KM100 Adds Chevy Cruze LS 2011 by OBD Success
This is how to program Chevrolet Cruze LS 2011 key adding with Autel KM100.
Autel MaxiIM KM100 IMMO Key Programmer is able to add Chevrolet Cruze LS 2011 key by OBD successfully.Before that, KM100 will read its password at first, which can be used for all keys lost as well.
To check more KM100 Cruze coverage, please move to the below form.
Autel KM100 Vehicle Coverage
Chevrolet Cruze(EU)
| Year | System | Add key | All keys lost | Read password |
| 2008-2011 | Immobilizer(CAN) | By OBD | By OBD | By OBD |
| 2012-2015 | Immobilizer(CAN) | By OBD | By OBD | By OBD |
Chevrolet Cruze(US)
| Year | System | Add key | All keys lost | Read password |
| 2010-2016 | Keyless system(CAN) | By OBD | By OBD | By OBD |
| 2010-2016 | Immobilizer(CAN)(1.8L) | By OBD | By OBD | By OBD |
| 2010-2016 | Immobilizer(CAN)(1.4T) | By OBD | By OBD | By OBD |
| 2017-2019 | Immobilizer(CAN) | By OBD | By OBD | By OBD |
| 2017-2019 | Keyless system(CAN) | By OBD | By OBD | By OBD |
| 2020 | Keyless system(CAN) | By OBD | By OBD | By OBD |
Procedure
Prepare a working key & a new key.
This new key was generated by VVDI XN with CRUZE ID46 433 LS 1815.
Turn on with working key.
Plug Maxi VCI200 into OBDII port.
IMMO >> Chevrolet >> Automatic selection >> Read >> OK >> IMMO status scan >> Read VIN >> OK >> Blade key >> Control unit >> Read pincode immobilizer(BCMAUTO) >> Read pincode
Remark: Recommend to use USB cable connect to VCI and need good Internet WIFI for this process.
Turn ignition on.
Read password...wait 1-2mins
Read pincode success: 2406
Immobilizer(CAN) >> Clear DTC
Close all doors and turn ignition on.
Clear all DTC? OK
Clear DTC success.
Continue to press "Add key".
Close all doors and turn ignition on.
Enter pincode: 2406
Configuration system wait 12 mins...
Turn off and remove key.
Open and close driver door.
Insert the wanted match key and turn on.
The current key match completed. Press "Yes" to match next one.
Turn off and remove key.
Open and close driver door.
Insert the 2nd key and turn on.
The current 2nd key match completed. Press "No" to complete.
Turn off and remove key.
Open and close driver door.
System configuration wait 45s...
Turn ignition on.
Turn ignition off.
Turn on again.
The matched keys: 2
Key matches successfully.
Use each key to check engine start, both can start.
Remote function also work.
