Autel KM100 Universal Key Quick User Guide

---

Matched product:

To learn more tutorials, please check Autel MaxiIM KM100 Training Academy

 

• How to generate a key with Autel KM100?

Tools Required:
A blank key
Autel MaxiIM KM100

Connect Autel KM100 to Internet.

Step1. Generate Key
Universal Key >> Select vehicle details:
Region: North American
Make: Honda
Series: Accord
Year: 2019
Selected “Honda Accord 2018-2020”

Read the instructions carefully:

1. Place the blank key into KM100 key slot exactly as shown(Ensure a battery is inside).
2. Press “Generate Universal Key”.

Key generation process may take about 1 minute...
Once completed, KM100 screen will show a message indicating success.
Press “Completed” to exit.


Step2. Read Key Info
Special Function >> Universal Key Information Detection >> Detect
KM100 screen will read & display key info.
Done.

Next, we can use Autel KM100 to pair the key with vehicle.

 

• How Autel KM100 pair a key with vehicle(add key)?

Tools Required:
A working key
A blank key
Autel MaxiIM KM100

Make sure VCI is connected to OBD & KM100.
We can press “IMMO” directly after key was generated successfully. That means to pair the key with immobilizer system.

Since I have other working keys, I’ll go through “Hot Function”.
Is the ignition turned on by pressing Start button twice? Yes
Add key(guided) >> Start >> OK


Follow the instructions to operate:
Turn the ignition switch off.
(Don’t press the foot brake and press the engine Start/Stop button.)

Take 1 registered keyless access remote into the vehicle.
Remove all other keyless access remotes from the vehicle.
Press “OK”.

Turn the ignition switch on.
(Don’t press the foot brake and press the engine Start/Stop button twice.)

Working key info was read successfully. Now we can proceed to learn the blank key.
Key programming succeeded, would you like to learn the next one? Yes


Take all original keyless access remotes out of the vehicle.
Take a new keyless access remote into the vehicle.
The keyless access remote is now registered. Press “OK”.
Key programming succeeded, would you like to learn the next one? No

Turn the ignition switch off.
(Don’t press the foot brake and press the engine Start/Stop button.)
Turn the ignition switch on.
(Don’t press the foot brake and press the engine Start/Stop button twice.)

Are both the keyless access and immobilizer indicator lights turned off? Yes

Turn the ignition switch off.
(Don’t press the foot brake and press the engine Start/Stop button.)
Turn the ignition switch on.
(Don’t press the foot brake and press the engine Start/Stop button twice.)

The registration is completed.
Turn the ignition switch off.
(Don’t press the foot brake and press the engine Start/Stop button.)

Check all keyless access remotes to ensure each will start the engine.
Check all keyless access remotes to ensure each will lock and unlock the doors.
Turn the ignition switch on.
(Don’t press the foot brake and press the engine Start/Stop button twice.)

All are workable, done.

 

• How to Adjust Keys & Remotes with Autel MaxiIM KM100?

Sometimes when you generate a new key, the transponder buttons are out of order. Such as lock button unlocks the door or opens the trunk. The Autel MaxiIM KM100 Key Tool can correct this aberration quickly. Follow the steps below to learn how to adjust Keys & Remotes.

In the case, the lock button is in the unlocked position while the unlock button is in the lock position. Most often, we don't know how this happened, but we can fix it with Autel KM100 now.

Place a blank key into KM100 key slot, go to
Special function >> Key adjustment
KM100 system should automatically read the values...
If you want to change the location, tap the arrow on the right.


Here we'll change location of lock & unlock buttons:
The key order works top to bottom, so we can see the unlock button is in position 1, and the lock button is in position 2.

1. Set the unlock button to position 2 by selecting the drop down arrow.
2. Change the lock button's position to 1 by selecting 1.
3. Press "Confirm Writing" to complete the adjustment.

Read current value again.
As we can see, the key button positions have been changed.
Now the unlock button unlocks the door and lock button locks the door.
Everything goes right.
Done.



This function not only works for Autel Keys & Remotes, but also can adjust other universal smart keys.
 

• How to calculate ID46 password on Autel KM100?

Path: Reading/cloning >> Clone >> 46 password calculation
Put an original key into MaxiIM KM100 key slot.
Click “Start”.


Note: If it’s a smart key, take apart it so that the battery won't interfere with the calculation process.

Put the key component and transponder head close to START button.
Turn on ignition switch.
Click “Next step”.
It'll take about 3 minutes for password calculation...

Record the password, as it can be used for simulation.

• How to do simulation with Autel KM100?

Now let's use the password in previous step to simulate a working key.
Put the working key into KM100 key slot.

Step1. Input Password
Reading/cloning >> Edit >> Select "HITAG2(ID46)" IMMO type >> Select "CRYPTO" >> Input password
Note:
Password begins with the 5th character and places the first 4 numbers at the end.
For example,
Password: 1999C48E7AA1
Input: C48E7AA11999

Click "Read All".


Record the info as you'll need it in next step.


Step2. Transponder Simulation
Transponder function >> transponder simulation >> ID46


P0: input the original key's ID labeled "IDE" on the last info.
P1: input the original key's password, minus first 4 numbers.
P2: keep the first 4 numbers already in P2, input first 4 numbers from the original password after.
P3: input "TMCF" info.
Click "Simulate" once completed.


Now you can enter the vehicle with KM100 key tool and turn the engine on.