Autel KM100 Adds 2004 BMW 525i E60 CAS2 Key Success
Introduce how to use Autel KM100 to add 2004 BMW 525i E60 CAS2 Key via OBD
Autel MaxiIM KM100 IMMO Key Programmer can add a new key for 2004 BMW 525i E60 CAS2 by OBD successfully. More functions coverage like all keys lost or password reading, please refer to the form below:
| Vehicle model | Year | System | Add key | All keys lost | Read password |
| 1 series | 2003/02-2011/06 | CAS2 | By OBD | By OBD | By OBD |
| 1 series | 2006/02-2013/10 | CAS3 | By OBD | Partially supported by OBD | By OBD |
| 3 series | 2004/02-2013/10 | CAS3 | By OBD | Partially supported by OBD | By OBD |
| 5 series | 2001/12-2005/09 | CAS2 | By OBD | By OBD | By OBD |
| 5 series | 2005/10-2010/05 | CAS3 | By OBD | Partially supported by OBD | By OBD |
| 6 series | 2002/05-2005/07 | CAS2 | By OBD | By OBD | By OBD |
| 6 series | 2005/08-2010/07 | CAS3 | By OBD | Partially supported by OBD | By OBD |
| 7 series | 2000/02-2008/07 | CAS1 | By OBD | By OBD | By OBD |
| X1 | 2008/09-2015/06 | CAS3 | By OBD | Partially supported by OBD | By OBD |
| X5 | 2006/02-2013/06 | CAS3 | By OBD | Partially supported by OBD | By OBD |
| X6 | 2007/01-2014/06 | CAS3 | By OBD | Partially supported by OBD | By OBD |
| Z4 | 2008/01-2016/08 | CAS3 | By OBD | Partially supported by OBD | By OBD |
Autel KM100 Program 2004 BMW 525i E60 CAS2 via OBD
Check the original key info firstly.
It's PCF 7945A/53A, HITAG BMW ID46
Status: locked.
Frequency: 315MHz FSK
Connect MaxiVCI V200 into OBDII port.
Turn ignition on with working key.
IMMO >> BMW >> Automatic selection >> Read >> OK
Yes >> Immo status scan
There's no faults.
Number of learning key: 7
Press "Add key".
Make sure Internet is good during the process.
Turn ignition on.
Select "Semi smart key".
Turn off then pull out the key.
OK >> Start
Put new key into coil signal of Autel KM100 Programmer.
Make dealer key...
Make dealer key success.
Try to start engine 1 time.
Whether new key can start engine? Yes.
Add key success.
The remote does work well.
Done.
