Autel KM100 Program 2015-2020 Nissan Navara ID46 Key

Autel MaxiIM KM100 Key Programmer can program 2015-2020 Nissan Navara ID46 key by OBD successfully. Follow the steps to learn how to do.

IMMO >> Nissan >> Manual selection >> China >> NP300 NAVARA >> 2014/10-2019/07 >> Yes >> Hot function >> Key learning(guided) >> Start

Operate according to the following procedures:
Insert ignition key into ignition key cylinder and turn ignition switch to the ON position(illuminate the instrument)
Press "OK".

This procedure erases all registered key ID.
Therefore, all of the customer's keys should be obtained before starting this procedure.
Press "Yes" to continue.



Perform key registration. Operate according to the following procedures:

1. Turn the ignition to OFF, remove the key from the key cylinder.
2. Insert an unregistered ignition key into the ignition key cylinder, turn the ignition to ON, and then wait for 5s or more. Check that the security indicator blinks 5 times. Turn the ignition to OFF, remove the ignition key, and then wait for 3s or more.
3. A maximum of 5 ignition keys can be registered by repeating procedures step 2 using unregistered ignition keys.
4. Insert an ignition key into the key cylinder and turn the ignition to the ON position.(the buzzer will sound once. Registration fails if the buzzer does not sound or sounds 3 times.) Turn the ignition to OFF position, remove the ignition key and then match.

Press "OK".

Control unit >> Remote system >> Remote system(BCM)(CAN) >> Match remote
Turn ignition switch from the OFF position to the on position.
Press "Yes".

Please enter button of the key.
Teach success.
Done.

This is how to program 2015-2020 Nissan Navara ID46 with Autel KM100.



Autel KM100 Nissan(EU) Navara IMMO Car List