Autel IM508S Adds 2017 Acura RDX Prox Key via OBD
Learn to Add 2017 Acura RDX Prox Key with Autel IM508S via OBD
We're working on a 2017 Acura RDX, and going to add another prox key with Autel MaxiIM IM508S for this vehicle. We now have one programmed key at hand, let's go to start.
IMMO >> Acura >> Manual selection >> RDX >> Smart key >> Push to start >> Yes >> Hot function
Autel IM508S prompted:
Is the ignition turned on by pressing Start button twice? Yes
Add key(guided) >> Start
Registration condition
- There are no DTCs.
- There must be one registered keyless remote.
- One keyless remote that is capable of starting the engine must be in the vehicle.
- The ignition switch must be turned on using the keyless remote.(The ignition key must not be used)
Press "OK".
Please turn the ignition switch off.
(Don't press the foot brake and press the engine start/stop button.)
Place a learned key in the vehicle and take all other keys out of the vehicle to a place more than 5m away.
Please turn the ignition switch on.
(Don't press the foot brake and press the engine start/stop button twice.)
Key programming succeeded.
Would you like to learn the next one? Yes
Place all keys out of the vehicle to a place more than 5m away.
Place the next key to be learned in the vehicle.
Key learning succeed.
Please turn the ignition switch off.
(Don't press the foot brake and press the engine start/stop button.)
Are both the keyless access and immobilizer indicator lights turned off? Yes
Please turn the ignition switch off.
(Don't press the foot brake and press the engine start/stop button.)
Please turn the ignition switch on.
(Don't press the foot brake and press the engine start/stop button twice.)
The registration is completed.
Please turn the ignition switch off.
(Don't press the foot brake and press the engine start/stop button.)
Check all keyless access remotes to ensure each will start the engine.
Check all keyless access remotes to ensure each will lock and unlock the doors.
Please turn the ignition switch on.
(Don't press the foot brake and press the engine start/stop button twice.)
