This function only supports models with 4A chip type smart card. Please ensure the key type is correct!
Press the START button, turn the Hazard Warning Light on. The password that is read: 439476
Step2. Program Key All keys lost >> Start
This function supports add key and all key lost; Performing this function will erase all existing keys, all the old keys must be relearned again to be able to use normally, press "Yes".
Turn the ignition off. (Note: the instrument screen is black) Open and then close the driver door once!
Autel IM508 will automatically enter the 6-digit security code. OK >> Yes
Note! Click "OK" to complete the following steps: Within 5s after OK is pressed, use the back or top of the Universal Smart Key to hold down the START button for 5s until the anti-theft lamps flash. (If the operation failed with the prompts, please remove the key case and re-execute the above step so that the key chip can be successfully programmed) Press "OK".
Programming succeeded. Press "No" to complete.
Number of current keys: 1
Test the new key, it can normally start the car. Done.